The default password is six zeros. When the default value Fast is selected, the Gate A20 is controlled by port 92 or chipset specific method resulting in faster system performance. Disclaimer The information in this guide is subject to change without notice. Description Illustration The illustrations show a 2-pin jumper. If you are already in the main menu, press exit Setup.
|Date Added:||1 August 2011|
|File Size:||48.7 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
If any other program writes to this memory area, a system error may result. Description Illustration The illustrations show a 2-pin jumper. Re-install bundled software without CD 5. Users please note that under NT 4. None KB, 5. Take the memory away from the slot. General Help Chapter 2 Advanced Vgz Features The advanced chipset features setup option is used to change the values of the chipset registers.
At first launch, Acer eRecovery prepares all the needed software and may take few seconds to bring up the software content window. Detach the mainboard from the chassis.
Acer Aspire SA85 Win XP Drivers Download
The information stored in memory will be used to restore the PC to the previous state when an wake-up event occurs. Default Settings The following table describes the parameters ader in this menu: Re-install bundled software without CD Acer eRecovery stores pre-loaded software internally for easy driver and application re-installation.
Enabled Sets the Acr status when the system is powered on. When the default value Fast is selected, the Gate A20 is controlled by port 92 or chipset specific method resulting in faster system performance.
The Product Information vgga contains general data about the system, such as the product name, serial number, BIOS version, etc.
Turn on the system.
Enter six zeros and continue. Before you proceed, make sure you have turned off the system and all peripherals connected to it. For more detailed information about the speakers, please refer to the included operating instructions. This item is available when CPU supports the feature. Removing the Cables from Mainboard 1. However, you will soon find out that this version is much more compact than the former ones.
T ACPI specification 1. In the Acer eRecovery window, select Recovery settings and click Next 5. T S0, S1, S3 and S5 sleep state support. The password typed now will clear any scer entered password from CMOS memory. T To select an option, move the highlight bar by pressing T To change a parameter setting, press T Press to return to the main menu. The value is set at the factory depending on the DRAM installed.
Acer Aspire SA85 Drivers Download – Download Center
This option only write blanks to the video buffer. T T PIO mode: The available setting values are 3 and 1. Disconnect the LCE instruction cable from mainboard. Any Acer Incorporated software described in this manual is sold or licensed “as is”. Everything above 1MB is either extended or extended memory.
Acer eRecovery consists of the following functions: Change these settings only if you are familiar with the chipset. T On board device configuration support.