Then connect the Fan Power Cable to one of the Fan connectors on board. Instant off default ; Delay 4 Sec. Mic is a connector for the microphones. Press this reset switch to restart system. Consumed Power, Energy Consumption:
|Date Added:||26 January 2009|
|File Size:||55.7 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Press this reset switch to restart system.
These settings do not provide optional performance. DRAM Timing is set manually with the options following this item below. The model will naturally have a number of office apps, including acoep, notes, email clientm browser, etc.
Then choose the utility or driver and select model name. Unless you have the above situation, you should disable this option.
Pushing the button once will switch the system ON. Writes blanks to the video buffer.
Follow the illustrations below: Front Panel connectors Then connect the Fan Power Cable to one of the Fan connectors on board. If you install two hard disks, you must configure the second drive to Slave mode by setting its jumper settings. Click on the “3-D” icon to start 6-channel configuration. Insert the DDR audoo modules into the socket at a degree angle then push down vertically to fit onto place.
Download Motherboards ACORP 4pm266m BIOS driver
If any difference is found between this manual and the motherboard you are using, please refer to the Web Site provided on this acopr. If this function is enabled and someone attempts to write data into this area, BIOS will show a warning message on screen and alarm beep.
The Mounting Holes and plastic tabs should fit over the edge and hold the DDR memory modules in place. The parallel port on your system is a pin, DB 25 connector.
Slave IDE Second- menu.
iXBT Labs – News Archive
Non-OS2 defaultOS2. Auto-run Menu You can use the auto-run menu in the driver CD attached in the motherboard package. Its 5-band equalizer has 4 presets: Serial ATA Connector Click the “Close” button to restart system and complete setup.
The bundle 48848p miniature earphones with neodymium magnets. Cylinder Showing the number of cylinder in the Hard Disk.
Precomp The number of Pre-compensation. The autorun starting screen looks like below: Jumper for Front Audio Connector Select Clubic DFI unveils 4 new motherboards. The modification is then stored in battery-backed RAM so that it can retain the setup information after the power is turned off.
Weekly News & Update
Each field provides one or more setup choices. Numpad is number keys; Off: This chapter is intended for guiding you through the process of configuring your system BIOS.
Initial display power management signaling. Disabled defaultEnabled.