Remove the screws on both sides of the manual cutter module. Once you press Select to choose initialization, you’ll be asked to confirm by pressing Select again. If not, then continue to the next step. Table of Contents Add to my manuals Add. Open the locking knob, and re-lock it, listening for a click.
|Date Added:||18 August 2005|
|File Size:||50.40 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Graphic Products DuraLabel 4000 User Manual
That tells us which version of the printer you have. Turn off the printer using the switch in the back, near the black power cord, and open the printer as if you were going to change all the supplies.
How to Create Floor Marking Corners. Graphics Black and white will give you the best contrast, and the best printing output. To get rid of the border, double-click the text box.
The ribbon should roll down the back of the back roller, forward underneath the print head but above the black sensor bar, and onto the front of the front roller.
Then, use your other hand to turn the printer on. You should hear a click from each side, near the green tabs, as the latches catch. DuraLabel supplies come in 70ft rolls, instead of the industry standard ft rolls.
With Word it is easy to make your images print in monochrome. To view or print a list of all of the included symbols, browse to the Symbols folder on the CD.
Black and white will give you the best contrast, and the best printing output. Lower the print head until it latches in place, close the lid, and power on the printer. Turn off the printer, and wait about five seconds.
Getting Started with DuraSuite. The printer will do what it can, and then stop. To print the manual completely, please, download it. The DuraLabel is really just a re-branded Godex printer, with supply locking added. Remove the ribbon take-up roll in front so that you can see the metal print head. If the cartridge seems to be in place, but the locking knob will not turn, the cartridge may need more pressure to fit down correctly.
Each black plastic ribbon spindle has a wider rim on one end, and a narrower end on the other side: If you are using a Mobile Print Stationgo through the “Programs” menu in the main screen toolbar and select “Printer Panel.
We are available to help with your labeling questions and needs. Turn the ribbon rewind knob on the cartridge counter-clockwise about a quarter of a turn, and try fitting the cartridge into place again.
Press Setup and scroll to the bottom of the list. The DuraLabel trademark is used herein to provide information concerning thermal transfer printers and supplies from Graphic Products.
Label Supply Spindle outlined 1a.
That’s the most common cause for this problem. Choose Cancel Jobs to close the error message without retrying the print job, so that you can check those instructions. Choose between online chat, request an duuralabel, or simply give us a call to speak with a knowledgeable customer support specialist.
DuraLabel , a discount printer that doesn’t save you money, locked
Click OK to save changes and close the window, and try printing your label again. Keep holding the button, and watch the light on top of the printer.
The most common cause for this is a simple mechanical issue, which can be fixed in a matter of seconds. Read our full trademark policy. Once it stops, you can open the Toro and roll the label stock back in — making sure that the front edge of the label stock is 40000 over the rubber roller near the front of the printer — or press Trim Label to cut off the extra supply and get a clean edge for your next label.
Then, open your label design again and try printing it once more.